Product Details:
Payment & Shipping Terms:
|
Product Name: | 5mm Round 940nm Infrared LED | Package: | Standard T-1 3/4 Diameter Package |
---|---|---|---|
Emitted Color: | Infrared | Lens Type: | Blue Transparent |
Forward Voltage @20ma: | 0.8-1.8V | Viewing Angle: | 45Deg |
Forward Current: | 100mA | Peak Emission Wavelength: | 940nm |
Spectral Bandwidth: | 50nm | Package Type: | Through Hole |
Shape: | Round | Power: | 100mW |
High Light: | light emitting diode led,940nm infrared led |
Know more details,please downlaod specifications:DL-503IRTA-2IR45.pdf
Part No. | Chip Material | Lens Color | Source Color |
DL-503IRTA-2IR45 |
GaAlAs |
Blue Transparent |
Infrared |
Notes:
Notes:
Parameters | Symbol | Max. | Unit |
Power Dissipation | PD | 100 | mW |
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 1.00 | A |
Forward Current | IF | 100 | mA |
Reverse Voltage | VR | 5 | V |
Operating Temperature Range | Topr | -40℃ to +80℃ | |
Storage Temperature Range | Tstg | -40℃ to +85℃ | |
Soldering Temperature | Tsld | 260℃ for 5 Seconds |
Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
Radiant Intensity (Note 1) * | Ee | 5.5 | 9.0 | --- | mW/sr | IF=20mA |
--- | 22.0 | --- | IF=100mA, tp=100µs, tp/T=0.01 | |||
Viewing Angle (Note 2) * | 2θ1/2 | --- | 45 | --- | Deg | IF=20mA |
Peak Emission Wavelength | λp | --- | 940 | --- | nm | IF=20mA (Note 3) |
Spectral Bandwidth | △λ | --- | 50 | --- | nm | IF=20mA |
Forward Voltage | VF | 0.80 | 1.20 | 1.50 | V | IF=20mA |
--- | 1.60 | 1.80 | IF=100mA, tp=100µs, tp/T=0.01 | |||
Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
1.Over-current-proof
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
2.Repairing2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90% RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70% RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3.Soldering IronEach terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.
4.RepairingRepair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.
HongKong Double Light Electronics Technology Co. Ltd was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
Please contact with me to help you find your right product and get your best price .
Tel: 86-755-82853859
Fax: 86-755-83229774
Email:wendy@doublelight.com.cn
Wechat:ywj199111103964
Skype:wendy@doublelight.com.cn
Contact Person: Mr. Chen
Tel: 86-755-82853859
Fax: 86-755-83229774