HongKong Double Light Electronics Technology Co. Ltd


Professional LED maker from China
Over 10 years of LED production experiences
Sufficent supply,entirely quality assured

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsIndicator LED

Super Bright 3mm Round Standard T-1 Type Ultra Red LED Water Clear Lens

Super Bright 3mm Round Standard T-1 Type Ultra Red LED Water Clear Lens

Super Bright 3mm Round Standard T-1 Type Ultra Red LED Water Clear Lens

Product Details:

Place of Origin: China
Brand Name: Doule Light
Certification: RoHS/ REACH
Model Number: DL-304SRCA-3SR30

Payment & Shipping Terms:

Minimum Order Quantity: 1,000pcs
Price: US$ 0.025-0.035 per unit (Pieces)
Payment Terms: Telegraphic Transfer in Advance (Advance TT, T/T)
Supply Ability: 2,000,000pcs per day
Contact Now
Detailed Product Description
Product Name: 3mm Round Standard Ultra Red LED Package: 3mm Round DIP LED
Emitted Color: Ultra Red Product Number: DL-304SRCA-3SR30
Color Temperature: 620-630nm Lens Type: Water Clear
Forward Voltage @20ma: 1.8-2.6V Viewing Angle: 30 Deg

DL-304SRCA-3SR30.pdf

          This is 3mm Round Standard T-1 Type Ultra Red LED, its lens color is water Clear.

 

Features:

  • Popular Standard T-1 diameter package.
  • High efficiency.
  • Selected minimum intensities.
  • General purpose leads.
  • Available on tape and reel.
  • Reliable and robust.
  • The product itself will remain within RoHS compliant version.

 

Descriptions:

  • The series is specially designed for applications requiring higher brightness.
  • The LED lamps are available with different colors, intensities.

 

Applications:

  • Status indicators.
  • Commercial use.
  • Advertising Signs.
  • Back lighting.

 

Package Dimension:

Super Bright 3mm Round Standard T-1 Type Ultra Red LED Water Clear Lens

 

Part No. Chip Material Lens Color Source Color
DL-304SRCA-3SR30 AlGaInP Whate clear Ultra Red

 

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25mm (.010″) unless otherwise noted.

3. Protruded resin under flange is 1.00mm (.039″) max.

4. Specifications are subject to change without notice.

 

 

Absolute Maximum Ratings at Ta=25℃

Parameters Symbol Max. Unit
Power Dissipation PD 80 mW

Peak Forward Current

(1/10 Duty Cycle, 0.1ms Pulse Width)

IFP 100 mA
Forward Current IF 25 mA
Reverse Voltage VR 5 V
Operating Temperature Range Topr -40℃ to +85℃
Storage Temperature Range Tstg -40℃ to +100℃

Lead Soldering Temperature

[4mm (.157″) From Body]

Tsld 260℃ for 5 Seconds

 

Electrical Optical Characteristics at Ta=25

Parameters Symbol Min. Typ. Max. Unit Test Condition
Luminous Intensity * IV 6000 7500 --- mcd IF=20mA (Note 1)
Viewing Angle * 1/2 --- 30 --- Deg IF=20mA (Note 2)
Peak Emission Wavelength λp --- 632 --- nm IF=20mA
Dominant Wavelength λd --- 624 --- nm IF=20mA (Note 3)
Spectral Line Half-Width △λ --- 20 --- nm IF=20mA
Forward Voltage VF 1.80 2.20 --- V IF=20mA
Reverse Current IR --- --- 10 µA VR=5V

 

Notes:

  • Luminous Intensity Measurement allowance is ± 10%.
  • θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
  • The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

Typical Electrical / Optical Characteristics Curves

(25℃ Ambient Temperature Unless Otherwise Noted)

Super Bright 3mm Round Standard T-1 Type Ultra Red LED Water Clear Lens

 

 

Reliability Test Items And Conditions:

The reliability of products shall be satisfied with items listed below:

Confidence level: 90%.

LTPD: 10%.

1) Test Items and Results:

Test Item Standard Test Method Test Conditions Note Number of Damaged
Resistance to Soldering Heat

JEITA ED-4701

300 302

Tsld=260±5℃, 10sec 3mm from the base of the epoxy bulb 1 time 0/100
Solder ability

JEITA ED-4701

300 303

Tsld=235±5℃, 5sec

(using flux)

1time

over 95%

0/100
Thermal Shock

JEITA ED-4701

300 307

0℃~100℃ 15sec, 15sec 100 cycles 0/100
Temperature Cycle

JEITA ED-4701

100 105

-40℃~25℃~100℃~25℃ 30min,5min,30min,5min 100 cycles 0/100
Moisture Resistance Cycle

JEITA ED-4701

200 203

25℃~65℃~-10℃ 90%RH 24hrs/1cycle 10 cycles 0/100
High Temperature Storage

JEITA ED-4701

200 201

Ta=100℃ 1000hrs 0/100

Terminal Strength

(Pull test)

JEITA ED-4701

400 401

Load 10N (1kgf)

10±1sec

No noticeable damage 0/100
Terminal Strength (bending test)

JEITA ED-4701

400 401

Load 5N (0.5kgf)

0°~90°~0° bend 2 times

No noticeable damage 0/100
Temperature Humidity Storage

JEITA ED-4701

100 103

Ta=60℃, RH=90% 1000hrs 0/100
Low Temperature Storage

JEITA ED-4701

200 202

Ta=-40℃ 1000hrs 0/100
Steady State Operating Life   Ta=25℃, IF=30mA 1000hrs 0/100
Steady State Operating Life of High Humidity Heat   Ta=60℃, RH=90%, IF=30mA 500hrs 0/100
Choice of various viewing angles   Ta=-30℃, IF=30mA 1000hrs 0/100

 

2) Criteria for Judging the Damage:

Item Symbol Test Conditions Criteria for Judgment
Min. Max.
Forward Voltage VF IF=20mA --- F.V.*)×1.1
Reverse Current IR VR=5V --- F.V.*)×2.0
Luminous Intensity IV IF=20mA F.V.*)×0.7 ---

*) F.V.: First Value.

 

Please read the following notes before using the product:

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

3. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

4. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

5. Caution in ESD

Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices equipment and machinery must be properly grounded.

Contact Details
HongKong Double Light Electronics Technology Co. Ltd

Contact Person: Tanky

Tel: +8613750005407

Send your inquiry directly to us (0 / 3000)

Other Products