5050 smd rgb led PLCC4 Led light water Clear Lens chip led module with Built-in WS281B Driver

Datesheet: DL-TOP5050RGBC-WS2812B.pdf                  LIGHT SOURCE: RGB+ blinking

5050 smd rgb led PLCC4 Led light water Clear Lens chip led module with Built-in WS281B Driver

Features and Benefits

1. Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel point.
2. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate.
3. Built-in electric reset circuit and power lost reset circuit.
4. Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color display, and scan frequency not less than 400Hz/s.
5. Cascading port transmission signal by single line.
6. Any two point the distance more than 5m transmission signal without any increase circuit.
7. When the refresh rate is 30fps, low speed model cascade number are not less than 512 points, high speed mode not less than 1024 points.
8. Send data at speeds of 800Kbps.
9. The color of the light were highly consistent, cost-effective.

Applications

1. Full-color module, Full color soft lights a lamp strip.
2. LED decorative lighting, Indoor/outdoor LED video irregular screen.

General description

1. DL-TOP5050RGBC-WS2812B is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components. It internal includes intelligent digital port data latch and signal reshaping amplification drive circuit. Also include a precision internal oscillator and a 12V voltage programmable constant current control part, effectively ensuring the pixel point light color height consistent.
2. The data transfer protocol use single NZR communication mode. After the pixel power-on reset, the DIN port receive data from controller, the first pixel collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade pixel through the DO port. After transmission for each pixel, the signal to reduce 24bit. pixels adopt auto reshaping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.
3. LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angle is large, good consistency, low power, long life and other advantages. The control chip integrated in LED above becoming more simple circuit, small volume, and convenient installation.

Mechanical Dimensions

Electrical Characteristics (TA=-20～+70℃,VDD=4.5～5.5V,VSS=0V,unless otherwise specified)

Switching characteristics (TA=-20～+70℃,VDD=4.5～5.5V,VSS=0V,unless otherwise specified)

LED characteristic parameter

Data transfer time (TH+TL=1.25μs±600ns)

Choose DOUBLE LIGHT, your expert LED components nearby!

Adcantage:

• Over 10 years work experience technical service team
• Manufacturer direct sale,high quality product and competitive price
• Mix order accepted and free sample
• Make double check strictly and packing carefully.
• We will refund you in case of bad quality issue happens due to our product itself.